GSO ISO 3870:2013
Gulf Standard
Current Edition
·
Approved on
31 December 2013
·
Conveyor belts (fabric carcass), with length between pulley centres up to 300 m, for loose bulk materials -- Adjustment of take-up device
GSO ISO 3870:2013 Files
English
3 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 3870:2013 Scope
This International Standard recommends the adjustment values which are valid for the most commonly used belts and for conveyors with a maximum length not greater than 300 m, fitted solely with fabric carcass belts. Owing to the wide variety of belt types, and to the number of determining factors in choosing the adjustment, it is not possible to propose general numerical values applicable to all cases. For belts with a fabric carcass whose length exceeds 300 m and belts with a metal carcass of any length, the manufacturer should justify the chosen adjustment.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints